YATO YT-85716 Manual De Instrucciones página 10

PRODUCT CHARACTERISTICS
The industrial vacuum cleaner is used for cleaning workplaces from dry and wet impurities, which would not be handled by a
household vacuum cleaner. It can also be used for extracting the dust generated when working with other power tools. Thanks
to the capacious container, fl exible hose, it is possible to reach hardly reachable places and clean them thoroughly. The base
fi tted with casters enables easy transport of the vacuum cleaner. The vacuum cleaner has been fi tted with replaceable air fi lters.
Correct, reliable and safe operation of the product depends on proper operation, therefore:
Before starting the work with this tool, please read this manual and keep it properly.
The supplier does not assume any liability for damages resulting from failure to follow safety regulations and recommendations
specifi ed in this manual.
PRODUCT ACCESSORIES
The product is delivered complete and does not require assembly. The product has been delivered with: fi lters, the fl exible hose,
extension pipes and two suction nozzles: wide and narrow.
TECHNICAL DETAILS
Parameter
Catalogue number
Mains voltage
Mains frequency
Rated power
Maximum socket load
Operating vacuum
Container capacity
Insulation class
Protection class
Weight
GENERAL SAFETY CONDITIONS
The device can be used by children aged 8 and older and people with reduced physi-
cal, sensory or mental ability, also by people lacking experience and knowledge, if they
are supervised and received instructions how to use it safely, and understand the haz-
ards. Supervise children so that they do not play with the device. Cleaning and maintenance
should not be performed by children unattended.The vacuum cleaner is designed for dry
and wet cleaning. Before the start of work involving the sucking of water or wet impurities,
please follow recommendations included in this user instruction. Failure to comply with them
may result in electric shock, which in turn may pose a threat to health and life of the user and
third parties.Suction of other wet impurities than water is forbidden. Suction of paints, oils,
solvents, gasoline and other fl ammable substances can lead to irreversible damage to
the vacuum cleaner or its components, and may also pose a threat of electric shock, fi re
or explosion. Before changing the type of work, always empty, clean and dry the vacuum
cleaner container. Impurities remaining in container after the previous work may disturb the
operation in case of changing its nature. Never suck in hot, glowing or burning objects. This
can lead to fi re or explosion and expose the user to serious injury or death. The maximum
temperature of impurities sucked in cannot exceed 40 degrees centigrade. The device is
intended for work in confi ned spaces and should not be exposed to water, including atmos-
pheric precipitation.Prior to connecting the power cord plug to the vacuum cleaner, make
O R I G I N A L
10
EN
Measuring unit
[V~]
[Hz]
[W]
[W]
[kPa]
[l]
[kg]
I N S T R U C T I O N S
Value
YT-85715
220 -240
50/60
1600
2000
18
30
I
IPX4
8.0