Publicidad
Idiomas disponibles
Idiomas disponibles
TEST THE WI-FI
®
SIGNAL STRENGTH IN YOUR GARAGE
Monitor and control your garage door from anywhere using the myQ
need a router with Wi-Fi and a smartphone or other mobile device. Make sure your
mobile device is connected to your Wi-Fi network. Hold your mobile device in the
place where your garage door opener will be installed and check the Wi-Fi signal
strength.
TOOLS NEEDED
During assembly, installation and adjustment of the opener, instructions will call for hand tools as illustrated below.
Stepladder
®
App. You will
Carpenter's Level
(optional)
Drill
Sockets and Wrench 1/2",
5/8", 7/16", 9/16", and 1/4"
®
See myQ
App Control page 32 to connect your garage door opener to your Wi-Fi
network. Do NOT connect prior to installation.
®
Wi-Fi
is a registered trademark of Wi-Fi Alliance
Pencil
Tape Measure
Wire Cutters
Drill Bits 3/16",
5/16", and 5/32"
Pliers
4
Check Signal Strength. If you see:
Wi-Fi signal is strong.
You're all set!
Install your new garage door opener.
Wi-Fi signal is weak.
The garage door opener will likely connect to
your Wi-Fi network. If not, try one of the
options below.
No Wi-Fi signal.
Try one of the following:
• Move your router closer to the garage door
opener to minimize interference from walls
and other objects
• Buy a Wi-Fi range extender
Visit support.chamberlaingroup.com for more details
Hack Saw
Claw Hammer
Screwdriver
Adjustable End Wrench
Publicidad
