Chain Counter Setting Menu - MZ electronic EV-040 Instrucciones De Uso

Chain counter setting menu

Hold down the
to access the instrument setting menu. The
following page will appear on the display:
Use the (DOWN) and
move around the menu options.
Once you are positioned on the item to be modified press the
choice.
Use the (DOWN) or
Once one is positioned on the parameter press the
According to the type of parameter, using the
reduce/increase the value of the same or disable/enable the function.
Once the modification has been performed, press the
Using the (DOWN) key go to the Exit option and press the
the setting menu. The same procedure must be used to return to the main page.
EV-040
Parameter
Up Alarm
Auto Down
Turnoff Time
Units of measurement
Chain Measure
Barbotin Circumference
Sensor type
Language
Works Hours
Division factor
(ON) key for six seconds
(UP) keys to
(UP) keys to move from one parameter to another.
Default value
3.0 metres
Off
30 seconds
Metres/centimetres
0.0 metres
33 cm
unknown
Italian
0
1
Menu
M e a s u r e
A l a r m s & F u n c t i o n
S e t t i n g s
L a n g u a g e
S e n s o r C a l i b r a t i o n
Menu
L a n g u a g e
S e n s o r C a l i b r a t i o n
Te s t s
E x i t
(ON) key to confirm your
(ON) key to enable modification.
(DOWN) and (UP) keys it is possible to
(ON) key to confirm.
(ON) key again to return to
21
English
Rev. 10 – 2014