Publicidad
Ba
3.
Spread a thin layer of glue in the dowel holes in the Right Side Assembly (Ca) and Left Side Assembly
(Ba). Insert the dowels in the Bottom Shelf (Ea) as shown in Figure 3. Gently tap with a rubber mallet
and quickly wipe away any excess glue. Using the pocket screw holes as guides, insert six 4x32mm
Pan Head Screws to attach the side assemblies to the bottom assembly. See Figure 3.
4.
Place the Top (Aa) face-down on a clean, protected surface. Spread a thin layer of glue in the dowel
holes in the Top (Aa). Rotate the bottom assembly over the top and lower the dowels into the holes.
See Figure 4. Gently tap with a rubber mallet and quickly wipe away any excess glue.
Using the pocket screw holes as guides, insert twelve 4x32mm Pan Head Screws to attach the
bottom assembly to the Top. See Figure 4.
Page 4 — 537KFDH — 09/08
Fig. 3
Ea
O
Fig. 4
O
Aa
Ca
Publicidad
