Fenton 102.106 Manual De Instrucciones página 4

OVERVIEW
1. Line output
The sound signal from long-playing record is
sent to this line output. Connect this signal to
the line input of an such as an amplifier or a line
input of a CD/DVD player.
2. DC IN port
Connecting the 5Volt/DC power adaptor.
3. Tone arm Lever
Raises and lowers the tonearm.
4. USB port
Use the included USB cable to connect your
turntable to your computer. The USB connection
will send audio from the turntable to your
computer.
5. 33 / 45 / 78 RPM Switch
This switch controls the RPM of the turntable
platter.
6. Line input
Connect a CD player, digital media player, or
other audio source to this 3,5mm (1/8") stereo
line input.
7. Phono / BT Switch
Select Phono or BT input.
8. Autostop Switch ON/OFF
This switch turns auto stop on or off. When the automatic stop is enabled, the platform will start rotating as soon as the
tone arm is placed over the record and will stop rotating when it has reached the end of the record. Some vinyl records
stop before the end or do not stop when the end is reached. In this case set Auto-stop to OFF.
9. Power & volume control knob
To power on the record player, turn this knob clockwise until it clicks. When powered on, use this knob to adjust the
volume for the internal speakers and headphones. To turn off the record player, turn this knob counter clockwise until it
clicks.
10. Headphone input
Connect your headphone with this 3.5mm(1/8) jack connector.
11. LED indicator
12. Arm Clip
This specially designed arm clip secures the tonearm while at rest or when not in use. The arm clip has been designed
to remain in the up position while unlocked.
13. Cartridge with needle
When the turntable is not in use, it is recommendable to place the removable protection cover on the stylus.
14. Tone arm
The fixed tonearm can be raised and lowered by hand, or by pressing the raise / lower lever.
15. Platter
Place your record here.
16. 45RPM Adaptor
This adaptor allows you to play 45RPM records.
OPERATION
1. Connect the record player with the power adapter and plug the other end into a wall power outlet.
2. Remove white protective needle cover by gently pulling towards the front of the unit.
3. Place a vinyl record on the turntable platter and select the desired speed (33/45/78RPM)
according to the record.
4. Open the tone arm clip to release the tone arm. Gently move the tone arm and put the cartridge
onto the desired position of the record and the turntable player starts to play.
5. Turn the volume control knob clockwise to adjust the volume.
Noted: If the AUTO STOP ON/OFF Switch is turned ON, the record will stop automatically when finished. If Auto Stop Control is
turned OFF, record will NOT stop automatically when finished.
BT CONNECTION
Set the switch (7) in BT mode. The LED indicator will blink blue.
Turn on the BT-function on your mobile phone or tablet PC on and then search the turntable player (Fenton recordplayer). After
pairing and connection, the LED will light up continuously and you can play your music on your mobile phone or tablet PC on
this turntable player.
Turn the volume control to adjust the volume. (The volume control of the mobile phone, tablet or PC can also affect the total
volume.)