Safety; Intended Use - WIKA DELTA-comb DPGS40TA Manual De Instrucciones

2. Safety

2. Safety
WARNING!
Before installation, commissioning and operation, ensure that the
appropriate differential pressure gauge has been selected in terms
of measuring range, design and specific measuring conditions.
Check the compatibility with the medium of the materials subjec-
ted to pressure!
In order to guarantee the measurement accuracy and long-term
stability specified, the corresponding load limits must be obser-
ved.
Only work on the gauge with the voltage disconnected.
Non-observance can result in serious injury and/or damage to the
equipment.
Further important safety instructions can be found in the individual
chapters of these operating instructions.

2.1 Intended use

The differential pressure measuring instruments
are primarily used for the monitoring and control of low differential pressures
where there are high requirements in terms of one-sided overpressure and static
pressure.
Typical markets for these products are the shipbuilding industry, process heating
technology, the heating, ventilation and air-conditioning industries, the water/
wastewater industry, and machine building and plant construction. For these, the
main function of the measuring instruments is the monitoring and control of filters,
compressors and pumps.
The instrument has been designed and built solely for the intended use described
here, and may only be used accordingly.
The manufacturer shall not be liable for claims of any type based on operation
contrary to the intended use.
WIKA operating instructions DPGS40TA with component testing
of the DELTA-line product family
EN
5