Publicidad
Idiomas disponibles
Idiomas disponibles
7
Working conditions
1.
Keep the charging temperature of the charger and battery pack between 0°C ~ 45°C, and
the battery pack discharge temperature between - 10 °C ~ 60 °C.
2.
The working temperature of the pruning shears - 5 °C ~ 30 °C.
146
Art. 315
Pruning shears Titania E-40 TP
Usage
Art. 315
Pruning shears Titania E-40 TP
Usage
Proper use of the battery charger
Before using or recharging the batteries, make sure that the battery and the battery
charger are both dry.
1.
Only use the supplied charger to charge the battery. Failure to do so may result in fire or
explosion. Use the matching charger to ensure the safety of the device.
2.
Check the charger, cord and plug before each use. If it is damaged, please have it repaired
by qualified personnel and use original parts. Do not use a defective charger and turn it on
yourself to ensure the safety of the device.
3.
The link socket of the charger must be grounded. Make sure that the power supply voltage
matches the rating of the nameplate on the charger. Otherwise, there may be an electric
shock.
4.
Disconnect the charger from the power source before closing or opening the connection to
the battery.
5.
Keep the charger clean and away from rain. Do not use the charger outdoors. The ingress of
dirt or moisture will increase the risk of electric shock.
6.
The charger can only be used to charge the original battery. If it is used for other batteries,
it may cause personal injury and cause fire.
7.
Avoid mechanical damage to the charger. Otherwise, it may cause an internal short circuit.
8.
Do not use the charger (e.g. paper, textiles) on the surface of flammable materials.
9.
If the equipment is damaged, it must be replaced by an authorized local reseller or by
Stocker Srl.
For further information about the product, please contact info@stockergarden.com
7
147
Publicidad
