Publicidad
Idiomas disponibles
Idiomas disponibles
6. MAINTENANCE
6.1. REPLACE A BATTERY
Remove the battery compartment
flap. Use only new batteries (2 x
AAA battery). Replace the battery
compartment firmly.
6.2. MAINTENANCE, STORAGE AND CALIBRATION
Maintenance:
1. Remove any stains on the casing with a soft dry cloth.
2. Do not wash with water or detergent containing abrasive elements or
benzene.
Storage:
1. Clean the thermometer and replace the cover to protect the lens after
each use.
2. Do not expose the thermometer to direct sunshine, high temperatures,
damp conditions, fire, flame, vibration or impact.
3. Remove the battery for long time of non use.
Calibration:
This thermometer is calibrated at the time of manufacture. If the thermometer
is used according to instructions, periodic recalibration is not required. If at
any time you question the accuracy of the measurement, please contact the
retailer immediately.
Don't attempt to modify or reassemble the thermometer.
6.3. WARNING OF DIRT ON THE SENSOR
In order to remind the user to clean the infrared sensor, this thermometer
has a special alarm. If the thermometer hasn´t been used for a long time
or if several measures have been taken, the LCD will display the cleaning
symbol to remind the user to clean the infrared sensor. The thermometer will
return back to standby mode after pressing any button.
6.4. CARE AND CLEANING
1. Keep the probe surface clean, otherwise the reading will not be accurate.
2. Clean the probe with clean paper moistened in water or alcohol, and take
the reading after the water on the surface of the probe all evaporates.
Caution:
Make sure the tip of thermometer is clean. A dirty lens may cause an
inaccurate reading.
36
Publicidad
