THERMEx BREST Instrucciones De Montaje página 48

48
THERMEX BREST
7
Measure and cut a hole in the base of the cabi-
net.
10
Reinstall the brackets onto the side of the
hood.
13
Close the lid on the hood.
8
Push the hood up in the closet, so that the
spring brackets "click" up over the cabinet.
11
x2
Tilt the plate with the spots into place in the
hood.
12
Place the extraction pipe on the hood. Take
special care to ensure the non-return valve can
open and close freely.
NOTE: This does not apply if the hood is used
for recirculation.
M 513051068230012017
9
Tighten the four screws so that the hood is
flush with the cabinet's bottom.
12
Place the filter in the hood.