Safety Regulations - Ferroli SPACE 9 Manual Del Instalador

Strictly comply with the following regulations to prevent injury to the operator or damage to the machine.
• The unit installation must be done according to the installation rules valid in your country.
• This installer's handbook, the user manual and the wiring diagrams are integral part of the machine. They must be
kept with care and be ready to hand should the operators require them for consultation.
• Failure to comply with the instructions in this manual and inadequate installation of the conditioner may void the cer-
tificate of guarantee. Moreover, the Manufacturer shall not be liable for direct and/or indirect damages due to incor-
rect installation or for damages caused by conditioners installed by inexpert or unauthorized personnel.
• All extraordinary maintenance operations must be carried out by specialized and authorized technicians.
• Work in a clean, uncluttered place when installing the equipment.
• It is absolutely forbidden to touch moving parts or to move between the same.
• Before starting the conditioner, make sure that the various components and the entire system are in perfect and
safe conditions.
• Strictly comply with the routine maintenance operations.
• Insist on genuine spare parts. Failure to do so will void the guarantee.
• Do not remove or tamper with the safety devices.
• Disconnect the electric power source before proceeding with any work on the machine.
• Do not place anything on the top part of the units.
• Do not push items through the protective fan grilles or allow objects to drop through.
• The bank surface is sharp. Do not touch it without protective gloves.
• Carefully read the stickers on the machine, never cover them and replace them immediately should they be dama-
ged.
• Do not use the machine in an explosive atmosphere.
• The power line must be regularly grounded.
• If the power cable has been damaged, stop the machine if it is operating, and have the cable immediately replaced
by an authorized technician.
• The machine must be stored at a temperature between -25°C and 55°C.
• Use a powder extinguisher in the event of a fire outbreak. Do not use water.
• If the machine operates in an abnormal way, make sure that this does not depend on failure to carry out routine main-
tenance. Failing this, ask to have the machine checked by a specialized technician.
• If the outdoor unit must be dismantled, it is advisable to have the job done by an authorized technical service center.
• The machine must not be dumped if it is to be scrapped since it contains materials that must be recycled or dispo-
sed of by authorized centers.
• Do not wash the machine with direct or pressurized jets of water or with corrosive substances.
The Manufacturer and after-sales service network are at your disposal for prompt and accurate technical assi-
stance and for anything else able to ensure the best operation and achieve the utmost efficiency from your
machine.
10

SAFETY REGULATIONS