Publicidad
Idiomas disponibles
Idiomas disponibles
Using the Joystick Button
(Depending upon model)
(Image shown may differ from your TV.)
You can operate the TV by pressing the button or
moving the joystick left, right, up, or down.
NOTE
43/49UF6400, 43/49UF640T does not have a
Joystick button but has only a power On/Off
button.
Joystick Button
Basic Functions
Power On
Power Off
Volume
Control
Channels
Control
NOTE
• With your finger over the joystick button, move
it up, down, left, or right. Be careful not to press
the joystick button. If you press the joystick
button first, you may not be able to adjust
the volume level and/or scroll through saved
channels.
Adjusting the Menu
When the TV is turned on, press the joystick button
one time. You can adjust the menu items moving
the joystick button up, down, left, or right.
Turns the power off.
Accesses the quick settings.
Clears on-screen displays and returns to TV viewing.
Changes the input source.
When the TV is turned off,
place your finger on the
joystick button, press it once,
and release it.
When the TV is turned on,
place your finger on the
joystick button, press it once
for a few seconds, and release
it. All running apps will close
and any recording in progress
will stop.
If you place your finger over
the joystick button and move
it left or right, you can adjust
the volume level.
If you place your finger over
the joystick button and move
it up or down, you can scroll
through the saved channels.
Mounting on a Table
(Image shown may differ from your TV.)
1
Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (minimum) space from the wall
for proper ventilation.
1 0 c m
2
Connect the power cord to a wall outlet.
CAUTION
• Do not place the TV near or on sources of heat,
as this may result in fire or other damage.
Securing the TV to a Wall
(optional)
(Depending upon model)
1
Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2
Mount the wall brackets with the bolts to the
wall. Match the location of the wall bracket and
the eye-bolts on the rear of the TV.
3
Connect the eye-bolts and wall brackets tightly
with a sturdy rope or cable. Make sure to keep
the rope parallel to the flat surface.
10 c m
1 0 c m
m
1 0 c
7
Publicidad
