Descargar Imprimir esta página

brondell Swash LS1800-EW Manual Del Propietário página 27

Publicidad

Idiomas disponibles

Idiomas disponibles

MAINTENANCE
Mesh Filter and Carbon Deodorizer Cartridge
Cleaning the Mesh Filter
Cleaning intervals will differ depending on use
and water quality. It is recommended to check
the filter at least once per year.
1. Turn off the water supply and hold the toilet
flush lever down until all water has drained
from the tank.
2. Unplug the bidet seat, remove from the
toilet, and disconnect the bidet hose. You
may want to use a bucket to catch any
dripping water from the bidet hose.
3. Remove the mesh filter from the water inlet
with a pair of tweezers or needle-nosed
pliers.
Step 3
4. Clean the filter with a toothbrush while
running it under tap water to effectively
remove any foreign substances or build-up.
5. Replace the mesh filter and carefully check
that it is installed correctly. Improper
installation may result in the product leaking
water.
6. Reconnect the bidet hose and place the
seat back onto the toilet. Plug the cord back
in and turn the water supply back on.
Replacing the Carbon Deodorizer Cartridge
We recommend replacing the carbon
deodorizer cartridge every 6 months.
Replacements are available for purchase at
brondell.com.
1. Locate the deodorizer compartment. When
facing the toilet, the compartment is located
at the rear, right-hand side of the unit.
2. Remove the bidet seat from the toilet by
pressing the quick-release button on the
right side of the bidet seat.
3. Remove the compartment cover by pulling
on the plastic tab.
4. Pull out the old deodorizer cartridge from
the compartment and replace it with the
new cartridge.
5. Replace the compartment cover back onto
the bidet seat. Replace the seat onto the
toilet.
27

Publicidad

loading

Este manual también es adecuado para:

Swash ls1800-rw