Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL CUTTING
Clamp your workpiece if it is portable. Rest the front shoe of the saw on your workpiece (be sure the blade is not
contacting the workpiece) and start the saw. Start the cut, exerting enough pressure in the direction of the cut
to keep the blade cutting, and enough forward pressure to keep the shoe pressed firmly against the workpiece
at all times. Do not force the cut or stall the saw. Don't bend or twist the blade. Let the tool and the blade do the
work. In general, coarser blades are for wood, plastics, and composites, and finer blades are for cutting metal.
Chattering or vibration may indicate you need a finer blade or higher speed. If the blade overheats or clogs, it
may indicate you need a coarser blade or slower speed setting. Replace blades when they become dull. Dull
blades will produce poor results and may overheat the saw.
METAL CUTTING
Blades specifically designated for cutting metals must be used for this purpose. You may use a light oil as a
coolant when cutting metal; this will prevent overheating of the blade, help the blade cut faster, and promote
longer blade life.
WARNING:
hearing protection during long periods of operation. Support and clamp workpiece
securely. Keep your balance and don't overreach.
MAINTENANCE
CLEANING
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
products, penetrating oils, etc., come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which may result in serious personal injury.
electric tools used on fiberglass material, wallboard, spackling compounds, or plaster are subject to accelerated
wear and possible premature failure because the fiberglass chips and grindings are highly abrasive to bearings,
brushes, commutators, etc. Consequently, we do not recommended using this tool for extended work on these
types of materials. However, if you do work with any of these materials, it is extremely important to clean the tool
using compressed air.
LUBRICATION
This tool is permanently lubricated at the factory and requires no additional lubrication.
TWO-YEAR WARRANTY
This product is warranted free from defects in material and workmanship for 2 years after date of purchase. This
limited warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser
is covered by this warranty and it is not transferable. Prior to returning your tool to store location of purchase,
please call Toll-free Help Line for possible solutions.
THIS PRODUCT IS NOT WARRANTED IF USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.
ACCESSORIES INCLUDED IN THIS KIT ARE NOT COVERED BY THE 2 YEAR WARRANTY.
BATTERY INCLUDED IS WARRANTED FOR ONE (1) YEAR AFTER DATE OF PURCHASE.
TOLL-FREE HELP LINE
for questions about this or any other GeNeSIS Product, please call Toll-free:
or visit our web site:
©Richpower Industries, Inc. All Rights reserved. Richpower Industries, Inc., 736 Hampton Road, Williamston, SC 29697
Printed in China, on recycled paper
10
Wear safety glasses. Wear a dust mask if operation is dusty. Wear
Do not at any time let brake fluids, gasoline, petroleum-based
www.genesispowertools.com
20V
Scie alternative à pile lithium-ion 20v
MAX Lithium-ion Reciprocating Saw
Operator's Manual
Manuel d'utilisation
888-552-8665
GLRS20A
GLRS20A
.
Publicidad
