Publicidad
Idiomas disponibles
Idiomas disponibles
7.2.
Faults Display
Problem
"Pr1" flashes on the display
and the buzzer emits an
intermittent noise
Pr1
Cold room probe error
"Pr2" flashes on the display
and the buzzer emits an
intermittent noise
Pr2
Evaporator probe error
"Pr3" flashes on the display
and the buzzer emits an
intermittent noise
Pr3
condenser probe error
The letters "rtc" (clock error)
rtc
will flash on the screen
8.
INSTALLATION
8.1.
Packaging And Unpacking
Move and install the appliance respecting the
information provided by the manufacturer, shown
directly on the packaging, on the appliance and in
this manual.
The lifting and transportation system of the
packaged product envisages the use of a fork-lift
truck or a pallet stacker, using which particular
attention must be paid to balancing the weight in
order to prevent the risk of overturning (avoid
excessive tilting!).
!
ATTENTION: When inserting the lifting
device, pay attention to the gas supply pipe and
the position of the feet.
!
ATTENTION: given the presence of weights
concentrated in the high part of the appliance, do
not drag the appliance during movements (tipping
hazard and damage to feet).
The packaging is made of cardboard and the
pallet of wood. A series of symbols is printed on
the cardboard packaging which highlights, in
accordance with international standards, the
provisions which the appliances must be subject
to during loading, unloading, transportation and
storage.
Causes
The wrong type of
probe is installed.
The probe is faulty.
The probe – circuit
board connection is
incorrect.
The temperature
detected by the probe
is out of the limits
accepted by the cold
room probe in use
The current time setting
has been deleted.
TOP
On delivery, check that the packaging is intact and
has
not
transportation.
Any damage must be notified to the transportation
company immediately.
The appliance must be unpacked as soon as
possible to check that it is intact and undamaged.
Do not cut the cardboard with sharp tools in order
to
prevent
underneath.
Pull the cardboard packaging upwards.
After having unpacked the appliance, check that
the features correspond to those requested in the
order;
For
any
immediately.
15
ENGLISH
Solutions
Contact the after-sales
centre.
Check that the cold room probe
is the NTC type.
Check the integrity of the cold
room probe.
Check correctness of the
instrument - probe connection.
Check that the temperature in
proximity of the cold room probe
is not out of the accepted limits
Set the day and time.
FRAGILE
DO NOT EXPOSE
HANDLE
TO HUMIDITY
WITH CARE
suffered
any
damage
damage
to
the
steel
anomalies,
connect
the
GB
during
panels
dealer
Publicidad
