Publicidad
Idiomas disponibles
Idiomas disponibles
Fuel and lubrication system
Fuel tank capacity, US Pint/cm
Oil tank capacity, US Pint/cm
Type of oil pump
Weight
Weight, lb/kg
Saw chain/guide bar
Type of drive sprocket/number of teeth
Saw chain speed at 133% of maximum engine power
speed, ft/s / m/s.
Recommended cutting equipment
A specific chainsaw model has to be evaluated with the
cutting equipment to be recommended and fulfill the
requirements in ANSI B175.1-2012 (Internal Combustion
Engine-Powered Hand-Held Chainsaws - Safety and
Environmental Requirements) and Canadian Standards
CSA Z62.1-15 (Chainsaws) and CSA Z62.3-11 (R2016)
(Chainsaw kickback).
Chainsaw model RedMax GZ360 met the safety
requirements in ANSI B175.1-2012 and Canadian
Standards Association CSA Z62.1-15 (Chainsaws) and
CSA Z62.3-11 (R2016) (Chainsaw kickback), when
equipped with the below listed saw chain and guide bar
combination(s).
Note: Other chainsaw models may not meet the
kickback requirements when equipped with the listed
guide bar and saw chain combinations.
Guide bar
Length, in/cm
Pitch, in
14/36
3/8
16/41
Filing equipment and filing angles
Using RedMax file gauge will give you the correct filing
angles. We recommend you to always use a RedMax
file gauge to restore the sharpness of the saw chain.
The part numbers are given in the table below.
36
3
3
Accessories
Gauge, in/mm
Max. nose ra-
dius
0.050/1.3
9T
RedMax GZ360
0.6/300
0.43/200
Adjustable
8.6/3.9
Spur/6
81.3/24.8
We recommend only to use the listed guide bar and saw
chain combinations.
Low kickback saw chain
A saw chain that is designated as Low kickback saw
chain, meets the low kickback requirement specified in
ANSI B175.1-2012.
Kickback and guide bar nose radius
For sprocket nose bars the nose radius is defined by the
number of teeth (for example 10T). For solid guide bars
the nose radius is defined by the size of the nose radius.
For a given guide bar length, you may use a guide bar
with smaller nose radius than listed.
Saw chain
Type
RedMax H37
If you are not sure of how to identify what saw chain you
have on your chainsaw, please visit your servicing
dealer for more information.
Length, drive
Low Kickback
links (no.)
52
Yes
56
993 - 003 - 30.01.2019
Publicidad
