Publicidad
button "Menu"
. If you need program "Multicook" choose it the same way as any other program. You'll see preset time and temperature settings (for "Multicook" they are 45 minutes and 90 degrees). In 5
seconds indication
and preset time
will start flashing. You could change time that moment using buttons
and
. When you press button
, you change minutes from 0 to
59. Pressing button
, you change hours from 0 to 15. The interval is 1 hour and 1 minute. If you keep pressing the buttons
and
then interval is 5 hours and 5 minutes. To change
temperature settings wait until indication
starts flashing. Set necessary temperature meaning using buttons
and
. Temperature meanings are from 30 to 170°C with interval 1°C. To increase
temperature press
, to decrease -
. If you keep the buttons
и
pressed, then interval is 5°C. When you set temperature and time press
and cooking process will start.
Note: Time and temperature adjustment is unavailable in program «Йогурт/Yoghurt».
AUTO KEEP WARM
All programs except "Yoghurt" and "Fry" have "Auto Keep Warm" function which means that Keep Warm always starts after the finish of cooking program. If Auto Keep Warm follows cooking program you see
indication above Keep warm. If there is no indication then there will be no Keep warm after the program finish. You could switch off Auto Keep Warm in any moment of cooking process – when you choose cooking
program, when program is going and when the program is over. To cancel Auto keep warm please keep pressed button
for 4 seconds.
Note: In spite of the fact that Keep warm function is available for 24 hours, don't leave cooked food for a long time. That may cause meal spoilage.
Note: If temperature in any cooking program exceeds normal or stipulate then the appliance will automatically switch to Keep warm state and Keep warm indicator will light.
WARM UP
If you need cooked meal to be warmed up please press button
and button
(without any cooking program selecting). Indication above Keep Warm starts lighting and the multicooker will start
warming up cooked meal.
DELAY
Use this function to delay time of cooking process start. Press button
. Display shows indication
and time
will start flashing. Set up necessary time with buttons
and
:
for hours,
for minutes. Press start
(if cooking program is already chosen) or "Menu"
to choose the program.
Note: Don't leave products in the multicooker pot for time more than 12 hours – some products could spoil. Please mind product characteristics when you plan delay time.
PROGRAM CANCEL
To cancel selected program or settings press button
.
TROUBLESHOOTING
Case
Cause
Solution
The multicooker doesn't switch on
There is no incoming power
Check power
17
Publicidad
