Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly
• Save all instructions
Read and follow the assembly instructions. Do not discard any parts or materials until the unit is assembled.
References to the right or left side of the tiller are from the viewpoint of the operator's position behind the tiller.
WARNING
Do not operate tiller if it is damaged or not completely and correctly assembled.
WARNING
Before doing any assembly or maintenance to the unit, remove the wire from the spark plug.
WARNING
Always wear ANSI compliant safety glasses with side shields while assembling the tiller.
The following components will be found in the carton. Quantities shown in ( ).
1. (1) Tiller
2. (1) Handle Assembly
3. (1) Depth Regulator Bar
4. (1) Tiller Operator's Manual
5. (1) Engine Manual
6. (1) Bottle of Engine Oil
7. (1) Parts bag containing the following:
a. (2) M10 x 25 mm flange head bolts, lock washers and nuts for assembling lower handle
b. (4) M8 x 50 mm saddle bolts and washers for assembling upper handle
c. (4) Handle knobs for assembling upper handle
d. (2) Wheel locking pins
e. (1) Pin
f. (4) M8 x 20 mm bolts, split lock washers, flat washers, nuts for assembling front guard
8. (2) Wheel and tire assemblies
9. (1) Front Guard
A
How to Remove Tiller from Carton
1. Remove all parts and packaging components.
2. Use a utility knife to cut all four vertical edges and lay the side panels flat around the tiller.
3. Remove any remaining packaging.
Questions? Call Toll Free at 1-800-737-2112
If you need assistance or find any parts missing,
CALL TOLL FREE: 1-800-737-2112.
Copyright © 2016 MAT Engine Technologies, LLC
7
Publicidad
