Marcy PM-10110 Manual Del Usuario página 7

IMPORTANT ASSEMBLY INFORMATION
Tools Required for Assembling the Bench: Two Adjustable Wrenches and Allen

Wrenches.
NOTE: It is strongly recommended that this equipment be assembled by two or more

people to avoid possible injury.
Ensure Carriage Bolts are inserted through the SQUARE holes on components that need to

be assembled. Attach washer only to end of the Carriage Bolt.
Use Allen Bolts or Hex Bolts inserted through the ROUND hole on components that need to

be assembled.
Always wait until all bolts are assembled onto the bench before tightening the bolts. Do not

tighten each bolt right after it is installed
Fasten Nuts and Bolts
©MPEX INC.
Securely tighten all Nuts and Bolts after all
components have been assembled in current and
previous steps.
NOTE: Do not over tighten any component with
pivoting function.
Make sure all pivoting components are able to move
freely.
Do not tighten all Nuts and Bolts in this step.
6
www.marcypro.com