English
1) GENERAL INSTRUCTIONS
- Please read carefully the operating and safety instructions before using our products. These instructions
must be adhered to. Keep the instructions booklet for further check-ups.
- Familiarize yourself with the precise use of the item.
- If the table is handled by unqualified people in an inappropriate way or not according to the intended
purpose, the use of the examination table may be dangerous. Be careful when handling the table as there
is a risk of being trapped by the mobile parts and because of sudden movements.
- Regularly check the table entirely to find any sign of malfunction or damage. Periodically check mains
cable and plug. We recommend to handle them with the utmost care and to avoid the bending of the
cables.
- Every single part or component of the table follows a thorough quality control thus ensuring a smooth
finish. Nevertheless, proceed with caution when handling the table because there might be any corner or
protruding part which might result unintentionally harmful.
When raising or lowering the stretcher or when operating its modules, MAKE SURE
THAT NEITHER THE PATIENT NOR THE THERAPIST ARE TRAPPED between the
moving parts of the lifting mechanism by hands, feet or any other part of the body or
clothing. Be careful, since there is a risk of entrapment between mobile and fixed parts
of the stretcher, or, and due to unexpected movements when activating its modules.
Only operate the stretcher when there is no possibility that any part of the body could
be trapped and injured while moving the stretcher up/down or activating the tilt of the
component modules.
Pay special attention in the case of children and/or unauthorized personnel. Do not
leave children alone or unattended in the area around the stretcher.
Maintenance or cleaning tasks must be carried out only by authorized personnel and
with the stretcher drive systems properly blocked.
- Worn or damaged pieces must be solely replaced by original pieces by the manufacturer depending on
the table model.
- All components parts or accessories should be fitted or fixed in according to the special manufacturer's
instructions. Any spare / replacement component part different to the manufacturer's could be dangerous
for the people involved in the table handling.
* Notice: The use of non original pieces or the alteration of the item will incur in a loss of validity
of the manufacturer's guarantee, instructions and Declaration of Conformity.
The design of the different sections and tilting angles obeys to the standards of specific
profesional areas such as the physiotherapy, rehabilitation and related disciplines, hence the
specific dimensions conforming to these practices.
ATTENTION: Be careful, as there is a risk of entrapment between moving and/or fixed
parts and due to unexpected movements. Only operate the stretcher when there is no
possibility that any part of the body could be trapped and injured while moving the
stretcher up/down or activating the tilt of the component modules.
2) OPERATING INSTRUCTIONS
a) SET UP
The stretcher weighs approximately 100 kg, in the case of electric / hydraulic, and to unpack it, a minimum
13