Admin Password - Belkin OmniView SMB CAT5 Manual Del Usuario

Using Your SMB CAT5 KVM Switch Using Your SMB CAT5 KVM Switch
Security
This feature allows you to enable an administrator password to prevent
unauthorized users from accessing the OSD. To enable or disable the Security
feature, use the arrow keys to navigate to the "Security" field and press the
space bar.

Admin Password

This allows you to specify the administrator password needed to access the
OSD when the Security feature is enabled. To set the password, use the
arrow keys to navigate to the "Admin Password" field and type in the desired
password. You may use up to eight uppercase characters for the password.
Password characters are not case-sensitive. Press "Esc" or use the arrow keys
to navigate to fields and save the password. Use the "Back Space" key to erase
the password.
Hot Key
This allows you to select which key will be used to initiate hot key commands.
You have four options to choose from: "Scroll Lock", "Print Screen", "Left
Ctrl", and "F12". The default key for all hot key commands is "Scroll Lock" (see
"Keyboard Hot Key Command Shortcuts" below). To designate a different key to
initiate hot key commands, use the arrow keys to navigate to the "Hot Key" field,
press the space bar until the preferred key is found, and press "Enter" to save
the entry.
36