Makita ET-120 C Manual De Instrucciones página 6

ENGLISH
(Original instructions)
1 Cable holder
2 Power supply cord (the shape
may differ from country to
country)
3 Rear handle
4 Lock-off lever
5 Switch trigger
6 Front handle
7 Hanger (suspension point)
8 Barrier
9 Cutting tool guard (protector)
SPECIFICATIONS
Model
Type of handle
Overall length
Continuous rating input
No load speed
Cutting tool
Cutting width
Net weight
Safety class
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Noise Sound pressure level average
Cutting tool L
PA
Cutter blade
Nylon cutting
head
• Wear ear protection.
Vibration
Cutting tool a
Cutter blade
Nylon cutting
head
• The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
6
Explanation of general view
10 Cutting tool
11 Shoulder harness
12 Cushion
13 Most effective cutting area
14 Handle
15 Rubber part
16 Inner protector
17 Outer protector
18 Receive washer
19 Round bar
20 Blade
Uncertainty K
(dB(A))
(dB(A))
80.8 2.5
85.3 2.5
Front grip
Uncertainty K
(m/s )
2
(m/s )
2
h
2.856 1.5
2.768 1.5
ET-120 C
Loop handle
1,630 mm
1,000 W
5,700 min
–1
Cutter blade
230 mm
4.7 kg
Sound power level average
L (dB(A))
wA
93.45
93.84
Rear grip
a (m/s )
2
h
2.712
2.694
• Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to
the trigger time).
21 Clamp washer
22 Cup
23 Nut
24 Nylon cutting head
25 Cord cutter
26 Cover
27 Hanger
28 80 – 100 mm
29 Spool
ET-110 C
5,700 min
Nylon cutting head
350 mm
4.9 kg
/ II
Applicable standard
Uncertainty K
(dB(A))
1.23
EN 60335-1,
EN 50636-2-91,
1.58
EN ISO 11806
Applicable standard
Uncertainty K
(m/s )
2
1.5
EN 60335-1,
EN 50636-2-91,
1.5
EN ISO 11806
–1