Descargar Imprimir esta página

Bostitch CAP2045ST-OL Manual De Operación Y De Mantenimiento página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

GENERAL MAINTENANCE (continued)
Changing the Oil:
1. Verify the compressor is turned Off.
2. Place a small catch basin under the oil drain port (an 8oz. cup will work fine).
3. Remove the dipstick.
4. Remove the oil drain plug/sight glass.
5. Allow the oil to drain into the catch basin - tilting the compressor toward the
drain plug is beneficial.
6. Insert the oil drain plug/sight glass into the oil drain port.
7. Add 7.5 oz of 30w non detergent oil to the crankcase.
8. Insert dipstick.
Draining Tanks - Pull-Style Drain Cocks:
1. Verify that the compressor is turned Off.
2. Holding the handle, tilt the compressor toward the drain cocks so that they are positioned
at the bottom of the tank.
3. Pull the cord to open the drain valves.
4. Hold until all moisture has been removed.
5. Release when done.
Draining Tanks - Twist-Style Drain Cocks:
1. Verify that the compressor is turned Off.
2. Holding the handle, tilt the compressor toward the drain cocks so that they are positioned
at the bottom of the tank.
3. Turn the drain cocks to open the valve.
4. Keep the compressor tilted until all moisture has been removed.
Air Filter Installation:
1. Remove the plastic plug from the side of the pump head.
2. Remove the air filter from the box.
3. Screw the air filter into the threaded opening on the side of the pump head.
Checking/Cleaning the Air Filter:
WARNING:
COOLING FINS, PUMP HEAD, AND SURROUNDING PARTS ARE VERY HOT. DO
NOT TOUCH.
1. Verify that the compressor is turned Off.
2. Remove the cap by turning clockwise.
3. Remove the filter element from the cap.
4. Clean filter pad with soap and water as necessary. If the filter becomes clogged or
damaged, replace it.
WARNING:
NEVER CLEAN AIR FILTER WITH A FLAMMABLE LIQUID OR SOLVENT.
EXPLOSIVE VAPORS MAY ACCUMULATE IN THE AIR TANKS AND CAUSE AN EXPLOSION,
RESULTING IN SERIOUS INJURY OR DEATH.
5. Insert filter element into the cap.
6. Place the filter cap onto the filter base and turn counter-clockwise to attach.
ANY OTHER SERVICE SHOULD ONLY BE PERFORMED BY AN AUTHORIZED
BOSTITCH SERVICE CENTER
9

Publicidad

loading