Stanley 4V360H Manual De Instrucciones página 8

Contents
GB
• User Safety
• Keypad, Modes, and LED
• Battery Safety
• Installing AA Batteries
• End of Life
• Declaration of Conformity
• Ease of Use
• Accuracy Check and Calibration
• Using Laser Accessories
• Maintenance and Care
• Warranty
• Specifications
User Safety
The definitions below describe the level of severity for
each signal word. Please read the manual and pay
attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided, will
result in death or serious injury.
 W ARNING: Indicates a potentially
hazardous situation which, if not avoided,
could result in death or serious injury.
 C AUTION: Indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injury.
NOTICE:Indicates a practice not related to personal
injury which, if not avoided, may result in property
damage.
If you have any questions or comments about this
or any Stanley tool, go to http://www.2helpU.com.
WARNING:
Read and understand all instructions.
Failure to follow the warnings and instructions
in this manual may result in serious personal
injury.
SAVE THESE INSTRUCTIONS
WARNING:
The following labels are placed on the laser
tool to inform you of the laser class for your
convenience and safety.
8
STHT77521-1 / STHT77522-1
STHT77523-1
www.STANLEYTOOLS.com
www.stanleylasers.com
Made in China
WARNING: To reduce the risk of
injury, user must read instruction
manual.
WARNING: LASER RADIATION. DO
NOT STARE INTO BEAM. Class 2
Laser Product.
CAUTION:
While the laser tool is in operation, be careful
not to expose your eyes to the emitting laser
beam.
CAUTION:
Glasses are supplied in some of the laser tool
kits. These are NOT certified safety glasses.
These glasses are ONLY used to enhance the
visibility of the beam in brighter environments
or at greater distances from laser source.
WARNING:
Laser Radiation Exposure. Do not disassemble
or modify the laser level. There are no user
serviceable parts inside. Serious eye injury
could result.
• Do not operate the laser in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. This tool may
create sparks which may ignite the dust or fumes.
• Do not use optical tools such as a telescope or
transit to view the laser beam. Serious eye injury
could result.
STHT77524-1 / STHT77525-1
STHT77526-1
www.STANLEYTOOLS.com
www.stanleylasers.com Made in China