05 Spin
06 Soil
07 Pre Soak
08 Fabric Softener
09 Alarm Off
10 Delay End
11 Deep Fill
12 Smart Care
13 Power
Untitled-17 37
Untitled-17 37
Press to change the spinning speed for the current cycle.
• High (Level 5) : Extends the spinning process to effectively
remove moisture from the load. This level uses a stronger
spinning process to remove moisture, so it is not suitable for
wrinkle-free or non-iron fabrics, or overloads.
• (Level 4) : Underwear, t-shirts, jeans, and sturdy cottons.
• (Level 3) : Jeans, wrinkle-free or wash-and wear items, and
synthetics.
• (Level 2) : Delicate items that require a lower spinning speed.
• No Spin (Level 1) : The drum does not spin after the final drain
process.
Rinse hold (All indicators are off): The final rinse process is
suspended so that the laundry remains in the water. To unload the
laundry, run a drain or spin cycle.
Press to change the soil level for the current cycle.
• Heavy (Level 5) : For extremely soiled loads.
• (Level 4) : For heavily soiled loads.
• (Level 3) : For moderately soiled loads. This setting is best for
most loads.
• (Level 2) : For lightly soiled loads.
• Light (Level 1) : For barely soiled loads.
Press to add 18 minutes of soaking time at the start of the wash
cycle for better stain removal.
Press to add an additional rinse at the end of the cycle for more
thorough removal of laundry additives and perfumes.
Press to turn on or off the alarm sound. When the alarm is off,
the melody of cycle completion and the power-off beep will not
sound. However, button and alert sounds will remain on.
Set the washer to finish your wash automatically at later time.
Choose a delay of between 1 to 24 hours (in 1 hour increments).
(For more information about Delay End , see page 44.)
Use this option where extra water is needed.
NOTE
The cycle time will be extended when you use this function.
This function enables you to check the status of the washer using
a smartphone.
Press to turn the washer on or off.
English 37
2022-04-08
2022-04-08
2:19:58
2:19:58