Publicidad
Idiomas disponibles
Idiomas disponibles
⚫
In Control tap, Room Temperature, Floor
temperature, Current setpoint, next
setpoint (next program)will be displayed.
⚫
Press Power key to turn on or off t he
thermostat.
⚫
Press + or – to adjust the current setpoint to
override the program. The button turns
green.
⚫
Press the " override program " button to
release the override or the override
setpoint would be released in next
program time slot.
⚫
The history show the Temperature history.
In 1day / 1week / 1month.
⚫
In Programs tap, current program mode will be
displayed. ( No Program / 1Day / 1+5+1 /
7days).
⚫
When No Program is selected, no setting can
be adjusted.
⚫
When 1Day / 1+5+1 / 7Day program is
selected. Program time slot and setpoint can
be adjusted.
⚫
In Setting Tap, Internal setting can
be adjusted.
⚫
Internal Sensor / External Sensor /
Combined sensor can be selected when it is
in heat
mode.
⚫
Only Internal Sensor will be used when it is
in cool mode.
⚫
Temperature offset is adjusted only when
there is difference betwe en the actual
temperature
and the measured value from thermostat .
⚫
Thermostat clock will be synchronized
when "Sync" is pressed.
Controller LCD Interface
Turn On/Off the thermostat
Press-n-Hold on [On/Off Key] to turn On / Off the
thermostat. When the thermostat is Off. No
Output will be activated.
Clock setting
**Normally the clock is automatically set once
wifi is connected and synchronize for each day.
So manual set is not necessary when it is online.
Press [CLOCK] to start the setting
Press [▲] / [▼] to change the day of week
Press [CLOCK] again to confirm day of week
setting and start to adjust hour
Press [▲] / [▼] to change the hour
Press [CLOCK] again to confirm hour setting
and start to adjust minutes
Press [▲] / [▼] to change the minutes
Press [CLOCK] again to confirm minutes setting
and start to adjust day of week
Press [blank] to confirm or leave the clock
setting. Or return after no key pressed for 20
seconds.
Clock synchronization
Controller syncs local time when it has access to
the internet. Please make sure it stays
connected.
If you wish to sync network clock manually, press
the
button on the App
Schedule Programming
When 1 day / 5+1+1 day / 7day program is
selected in internal setting.
⚫
Press-n-Hold on [Clock] to start the setting
⚫
Press [▲] / [▼] to adjust the day of week
⚫
Press [Clock] to confirm
⚫
Press [▲] / [▼] to adjust the time of schedule
⚫
Press [Clock] to confirm
⚫
Press [▲] / [▼] to adjust the setpoint
⚫
Press [Clock] to confirm
⚫
Press [Blank] to confirm and exit
Override Temperature
The Set point can be adjusted by [▲] / [▼].
When it is in program mode, The set point will be
overridden until the next time slot.. [Clock] can be
pressed to release the override status
Internal Parameter Setting
⚫
Press-n-hold on [Mode] key to start the
setting
⚫
Press [Mode] to advance to the next item
⚫
Press [▲] / [▼] to adjust the value
⚫
Press [blank] key to confirm and exit
User Interface Screen Saver:
The thermostat will go to screen saver mode after no key
for certain period:
Mode 0: Nothing will be displayed in screen saver mode.
Mode 1: Only room temperature will be displayed in screen
saver mode.
Mode 2: Room temperature and Time will be displayed in
screen saver mode.
Mode 3: Display all in screen saver mode.
Screen Saver Count Down:
The count down time (in seconds) to screen saver mode.
Display Unit:
Temperature unit in Celsius or Fahrenheit.
Time Display Unit
12/24
Publicidad
