Publicidad
Idiomas disponibles
Idiomas disponibles
16. Auxiliary jack
17. Battery compartment
18. Power input
Setting up the device for use
•
Choose a suitable location to set up the device: a dry, flat, non-slip surface that is easy
to use.
•
Ensure that there is sufficient ventilation when using the device.
•
Remove the protective film from the screen if it is present.
Power supply
•
Make sure that the voltage is the same as that indicated on the model's rating plate.
•
Unwind and connect the power cord provided (check inside the battery compartment,
if necessary) to the power input at the back of the machine and to a properly installed
power socket.
Inserting the batteries (not included)
1.
Open the battery compartment cover.
2.
Insert 6 LR14 ("C" size) 1.5 V batteries. Make sure that the polarity is correct (check the
markings on the bottom of the battery compartment)!
3.
Then close the battery compartment cover.
BATTERY WARNING:
This product contains a battery or batteries
•
Use the batteries correctly to avoid injury or fire caused by leakage, overheating,
explosion, erosion or other damage.
•
Store and keep new and used batteries out of the reach of children or other vulnerable
people. If the battery compartment does not close properly, stop using the product.
•
If the liquid from an alkaline battery comes into contact with your skin and/or eyes,
immediately rinse them with clean water and seek medical attention. If alkaline battery
fluid leaks, wipe off the fluid with a cloth and replace the battery with a new one.
Do not swallow the battery(ies). If swallowed, a button cell battery can cause severe
internal burns in 2 hours and can cause death. If the batteries are swallowed, contact a
poison centre immediately and seek medical attention.
- EN 20 -
Publicidad
