Stiga Force T8630 Manual Del Usuario página 4

5. Lay out Side Rails #25 and End Rail #26, around edges of table top
a s shown in Figure 3.
6. Slide Left #35 and Right #34 Vinyl End Caps onto the ends of
the Side Rails #25 as shown in Detail C.
7. Line up holes in rails with indentations in top and
secure using eighteen screws #20. See Figure 3
& Detail C.
8. Lay Corner Caps #22 on table as shown in
Figure 3. If Corner Cap sticks above the table
top surface of the table, flip over so the shorter
distance is against edge. Secure to bottom of
table with three Screws #21. See Detail D.
35 (LH)
Detail C
20
25
20
Detail D
Figure 3 Figure 3
Figure 3
7
4
Note: Rails attach
with #20 screws
20
26
20
Note: Rails attach
with #20 screws
25
34
(RH)