Descargar Imprimir esta página

PRETUL MOT-6020P Manual página 20

Publicidad

Slow speed Adjustment
• The slow speed screw is inside the lower orifice in the
motor cover and marked with a "T" in one side of the
jack-line.
• If the motor starts, runs and accelerates but cannot run
idle, turn to the right the idle screw so that the motor can
run idle.
• If the chain advances with the motor set in idle, turn the
idle button to the left to reduce the speed so that the
chain will nor advance.
• If the chain still moves when the motor is in idle speed
after adjusting the screw, turn off the chain saw, stop
using it until is adjusted in a
zed Service Center.
DANGER
• Using the chain saw whit the chain
moving when idle can cause severe personal injuries.
Spark Plug Replacement
• The motor need a Bosh L8RTF spark plug with an electrode gap of 0,025". Replace the spark plug with a similar new one
at least every six months.
• To replace the spark plug, remove the motor cover (see page 19).
• Using a special wrench turn left and loosen the worn spark plug and remove it.
• Insert the new spark plug. Tighten left using your hand.
• Use care to prevent damaging the spark plug thread. Otherwise the motor gets seriously damaged.
CAUTION
Periodic Maintenance
Carburetor cleaning *
Spark plug inspection and adjustment *
Fuel tank cleaning **
Fuel filter change **
Fuel hose replacement **
Spark arrester cleaning
* Trained user or
20
ENGLISH
Authori-
After
each use
General Cleaning
Air filter cleaning
Authorized Service Center
Adjustments
and Maintenance
Chainsaw Storage
When storing the chainsaw one month or longer,
consider the following:
• Drain all the contents of the fuel tank into a dedicated
gasoline container. All the remaining oil can be used in
another 2-stroke motor needing a 50:1 ratio.
• Run the motor until consuming all the fuel and it turn
off. This way the residual fuel will be eliminated and will
prevent gum residues that damage the fuel system.
• Drain all the oil tank contents off the bar and chain. Use
a dedicated container for oil.
• Clean the chainsaw thoroughly.
• Store the unit in a ventilated space away from corrosive
agents like corrosive garden chemicals or de-icing salt.
Also, away from children reach.
• Comply with all the government rules regarding safety,
handling and storing fuel.
Every
Every
25 h
50 h
.
**
Every
Every
150 h
250 h
Authorized Service Center
.

Publicidad

loading

Este manual también es adecuado para:

Mot-6018p2704527044