Descargar Imprimir esta página

Makita XLC10 Manual De Instrucciones página 12

Publicidad

Idiomas disponibles

Idiomas disponibles

You can store the sash nozzle in the nozzle holder.
2
Fig.28
► 1. Nozzle holder 2. Sash nozzle
CAUTION:
Be careful not to trap finger(s)
between the sash nozzle and the nozzle holder.
Trapping finger(s) may cause injury.
Sash nozzle + Extension wand
(Straight pipe)
In tight quarters where the cleaner itself cannot
squeeze in, or in high places hard to reach, use this
arrangement.
1
Fig.29
► 1. Sash nozzle 2. Extension wand (Straight pipe)
3. Cleaner body
Cleaning without nozzle
You can pick up powder and dust without nozzle.
Fig.30
1
3
2
For picking up dust on a floor in a standing position, it is
convenient to attach the extension wand to the cleaner.
Fig.31
► 1. Extension wand (Straight pipe)
Disposing of dust
CAUTION:
Empty the cleaner before it
becomes too full, or the suction force weakens.
CAUTION:
When closing the front cover, be
careful not to pinch your fingers.
NOTICE:
Never throw away the dust stopper
because it should be used whenever either the
dust bag or the paper filter is used.
NOTICE:
When the dust bag/paper filter is not
inside of the cleaner, the front cover does not
close completely. Do not force to close the front
cover. It may result in deforming or breakage of
the tool.
NOTICE:
When disposing of dust, also clean the
room for the dust bag/paper filter. The remaining
dust and dirt in the room may cause the sponge filter
to be clogged or the motor to be damaged.
1.
Push the button to open the front cover. Opening
it until a click is heard allows a positive stop at that
position.
2
Fig.32
► 1. Front cover 2. Button
12 ENGLISH
1
1

Publicidad

loading