sunjoe SPX3501-MAX Manual Del Operador página 8

Fig. 3
4. Slide the trigger gun holder in position (Fig. 4).
Fig. 4
Trigger gun
holder
5. To assemble the spray wand protector, first snap the tab
into the slot located at the bottom left side of the unit, and
then secure it in place with one 4.8 x 16 screw (Fig. 5).
Fig. 5
Nozzle
storage board
Fix with 4.8 x
16 screws
6. Fit the stainless steel lance into the trigger gun and rotate
the collar until the two parts are completely locked (Fig. 6).
Fig. 6
7. Connect the high-pressure hose to the trigger gun (Fig. 7).
Fig. 7
High-pressure hose
8
4.8 x 16 screw
Trigger gun
Stainless
steel lance
Slot
Tab
Collar
Trigger gun