Volpi PV360 Manual Del Usuario página 39

C. Turn counterclockwise as shown in the
picture, remove the M5 screw and remove the
rubber cover
E. Turn counterclockwise as shown in the
picture, remove the M3 screws from the blade
cover.
G. Clean up the rubbish as shown and grease it. H. According to the direction shown in the
C
D. Remove the ring nut clockwise as shown.
E
F. According to the direction shown in the
picture, remove the blade cover and take the
blade.
G
figure, grease the gear of the moving blade,
insert the moving blade and close with the
cover.
D
F
H
39