Brandson Equipment 301887 Manual Del Usuario página 17

10 .Projection
Press the "Projection On/Off" key on the front of the device to switch the projec-
tion on and off. To focus the projection, turn the focusing ring at the top of the
device. To turn the projected display by 180°, press the "180° Flip" key, which is also
located at the top of the device.
11. Radio function
Press the "Radio On/Off" key to switch off the alarm and activate the radio func-
tion. Use the "Next station" and "Previous station" keys to increase or decrease the
frequency. Hold one of the keys to start the automatic station search. The radio
tunes to the next available station automatically and plays it.
Note: For an optimum radio reception, it is advisable to completely roll out the
cable antenna.
12. Accessing and changing the radio station presetting
Press the "Radio On/Off" key to enable the radio function. You can switch between
the different radio frequencies using the "Next station" and "Previous station"
keys. Once you come to a desired radio frequency which you want to store, press
and hold the "M+/NAP/SET/MEM" key. "P01" starts to flash. Select the desired pre-
setting (P01-P10) using the "Next station" and "Previous station" keys and confirm
using the "M+/NAP/SET/MEM" key. Repeat this process to add other radio stations
to the presettings.
To switch between the preset radio stations, press the "M+/NAP/SET/MEM" key
while in the radio mode.
13. Dimming the display
To dim the alarm clock display, press the "SNOOZE/SLEEP" key repeatedly to select
between the three different dimming levels. If you want to enable this function,
then you should not be in radio mode.
17
English