HAMPTON BAY HB-4133-OR Guía De Uso Y Cuidado página 11

Troubleshooting (continued)
Problem
The lights stay on
continuously.
The lights flash on and off.
The lights flash once then stay
off in manual mode.
Possible Cause
□
The motion sensor may be picking
up a heat source, such as an air
vent, dryer vent, or brightly painted,
heat-reflective surface.
□
The motion sensor is in manual
mode.
□
The "Sensitivity" setting is set too
high.
□
The light fixture is wired through a
dimmer or timer.
□
The light fixture is on the same
circuit as a motor, transformer, or
fluorescent bulb.
□
Heat is being reflected from other
objects and may be turning the mo-
tion sensor on and off.
□
Nearby large, light-colored objects
reflecting light may trigger the shut-
off feature.
11
Solution
□
□
□
□
□
□
□
Please contact 1-855-HD-HAMPTON for further assistance.
Decrease the "Sensitivity"
setting or use the lens shield to
reduce the coverage area.
Switch the motion sensor to
auto. See Using manual mode
on page 9.
Decrease the "Sensitivity"
setting.
Do not use a dimmer or timer to
control the light fixture. Replace
the dimmer or timer with a
standard on/off wall switch.
Install the light fixture on a cir-
cuit without motors, transform-
ers, or fluorescent bulbs.
Decrease the "Sensitivity"
setting or reposition the motion
sensor.
Do not point other lights at the
sensor.
HAMPTONBAY.COM