Publicidad
Idiomas disponibles
Idiomas disponibles
Safety Decals
• Save all instructions
Assembly
• Save all instructions
Read and follow the assembly instructions. Do not discard any parts or materials until the unit is assembled.
References to the right or left side of the tiller are from the viewpoint of the operator's position behind the tiller.
WARNING
Do not operate tiller if it is damaged or not completely and correctly assembled.
WARNING
Before doing any assembly or maintenance to the unit, remove the wire from the spark plug.
WARNING
Always wear ANSI compliant safety glasses with side shields while assembling the tiller.
The following components will be found in the carton.
Quantities shown in ( ).
1. (1) Tiller
2. (1) Handle Assembly
3. (1) Front Handle
4. (2) Tine Assembly
5. (1) Tine Guard Assembly
6. (1) Depth Regulator
7. (2) M10x50mm bolts and lock nuts for assembling
stationary side shields
8. (1) Tiller Operator's Manual
9. (1) Engine Manual
10. (1) Bottle of SAE 30 Engine Oil
11. (1) Parts bag containing the following
a. (1) Spark plug wrench
b. (2) Combination wrenches
c. (4) M8x25mm bolts, flat washers, lock nuts for
assembling front carry handle
d. (2) M10x25mm flange head bolts, lock washers and
nuts for assembling lower handle
Questions? Call Toll Free at 1-800-737-2112
(Continued)
If you need assistance or find any parts missing, CALL
TOLL FREE: 1-800-737-2112.
e. (4) M8x60mm saddle bolts and washers for
assembling upper handle
f. (4) Handle knobs for assembling upper handle
g. (2) Wheel locking pins
h. (4) M6x25mm flange head bolts, flat washers and lock
nuts
i. (2) M10x50mm bolts and lock nuts for assembling tines
j. (1) Detent pin
k. (4) M8 wing nuts for assembling rotating side shields.
7
Copyright © 2009 MAT Engine Technologies, LLC
Publicidad
