Descargar Imprimir esta página

Echo EA-410 Manual Del Operador página 69

Ocultar thumbs Ver también para EA-410:

Publicidad

Idiomas disponibles

Idiomas disponibles

18
fuel fIlter
Level 1.
Tools required:
200- 250 mm (8 - 10 in.) length of wire with one
end bent into a hook, clean rag, funnel, and an ap-
proved fuel container.
Parts required:
Fuel Filter
DANGER
Fuel is VERy flammable. Use extreme care when mixing, storing
or handling.
1. Use a clean rag to remove loose dirt from around fuel cap and
empty fuel tank.
2. Use the "fuel line hook" to pull the fuel line and filter from the
tank.
3. Remove the filter from the line and install the new filter.
spark plug
Level 2.
Tools Required:
Spark plug wrench, feeler gauge, soft metal brush.
Parts Required:
Spark Plug NGK BPMR-7A
1. Remove spark plug and check for fouling, worn and rounded
center electrode.
2. Clean the plug or replace with a new one. DO NOT sand blast to
clean. Remaining sand will damage engine.
3. Adjust spark plug gap by bending outer electrode.
4. Install Spark Plug, and tighten to 14.7 - 16.6 N • m (150-170 kgf •
cm).
0.65 mm
(0.026 in.)

Publicidad

loading