Publicidad
• Bedienung • Operation • Utilisation • Bediening •
• Istruzioni per l´uso • Funcionamiento •
Battery use
• Use always 3V lithium battery
CR2025 into the remote control.
• Incorrect battery usage may cause
battery fluid leakage and/or damage.
• When not using remote control for an
extended period, remove the battery.
• Avoid dropping or damaging the
remote control.
Proper operating conditions
• Operate the remote control facing the
air cleaner.
• Operate within 20 feet of the air
cleaner.
Improper operating conditions
• Any location where there is inverter
lighting equipment or electronic
spontaneous lighting equipment.
• When objects or furniture are located
between the remote and the air
cleaner.
• When air cleaner unit is located in
direct sunlight, as sunlight may
interfere with the infrared sensor.
• In areas where fluorescent lighting is
flickering due to worn-out bulbs.
• Keep remote control away from direct
sunlight or heaters.
ON/OFF: Use the power button to turn
the power on and off. A short "beep"
will sound when the unit turns on or off.
Auto: Use the Auto button to engage
the unit into Auto mode.
Fan speed: By pressing up or down, the
unit will change fan speeds and enter
into manual mode.
Turbo: Use this button to switch from
automatic operation and begin the
maximum amount of room air cleaning
and air movement and will remain in
Turbo speed until changed into Auto or
Manual mode.
- 35 -
Publicidad
