Troubleshooting Guide
Disc source
?
The specified disc does not play, but another one plays
✔ The specified CD is quite dirty.
☞ Clean the CD.
✔ The CD is
upside-down.53
☞ Load the CD with the labeled side up.
✔ The disc is severely
scratched.55
☞ Try another disc instead.
?
The specified track will not
play.58-a
✔ Random play has been selected.
☞ Turn off random play.
?
Track repeat, track scan, and random play start by
✔ The setting is not canceled.
☞ The settings for these functions remain on until the setting to off
or the disc ejected, even if the power is turned off or the source
changed.
?
Cannot play CD-R or
CD-RW.60
✔ Finalization processing is not being conducted for CD-R/CD-RW.
☞ Conduct finalization processing with CD recorder.
?
A CD ejects as soon as it is
loaded.62
✔ The CD is upside-down.
☞ Load the CD with the labeled side up.
✔ The CD is quite
dirty.63
☞ Clean the CD, referring to the section on <CD cleaning> (page 5).
?
Can't remove
disc.64
✔ The cause is that more than 10 minutes has elapsed since the vehicle
ACC switch was turned OFF.
☞ The disc can only be removed within 10 minutes of the ACC
switch being turned OFF. If more than 10 minutes has elapsed,
turn the ACC switch ON again and press the Eject button.
?
The disc won't
insert.65
✔ There's already another disc inserted.
☞ Press the [0] button and remove the disc.
?
Track Search can't be
✔ For the albums first or last song.
instead.52
☞ For each album, Track Search can't be done in the backward
direction for the first song or in the forward direction for the last
song.
The messages shown below display your systems
condition.
E-04:
IN (Blink):
themselves.59-a
— 18 —
done.66-2
The CD is quite dirty. The CD is upside-down. The CD
is scratched a lot.
Clean the CD and load it correctly.
➪
The CD player section is not operating properly.
Reinsert the CD. If the CD cannot be ejected or the
➪
display continues to flash even when the CD has
been properly reinserted, please switch off the
power and consult your nearest service center.
E59