Auto Mode; Manual Mode; Sleep Mode; Child-Proof Lock - Airthereal Glory Days AGH550 Manual De Usuario

Please make sure the operating voltage is the same as the parametric label.
For American and Canadian users, our product will be equipped with a POLARIZED AC PLUG that
will fit into the power outlet only one way. If the plug does not fit fully into the outlet, reverse the plug.
If it still does not fit, contact qualified personnel to install the proper outlet.
After inserting the plug into the outlet, the LED air quality indicator will light up and change colors
(cycle through Blue-Green-Orange-Red). Once air quality has been detected, all the lights will turn off.
The unit will enter standby mode. The power button
1.2 Power On
• Press the button to process power.
• The blue breath light of the air quality indicator will twinkle for 15 seconds. Meanwhile, it starts to
detect the PM2.5 value and display on the LED display.
• It goes into Auto Mode when power on.
2. Modes

2.1 Auto Mode

• It goes into Auto Mode when power on or when you press the Mode
Auto Mode.
• In Auto Mode, the Auto Mode will glow and the unit will automatically operate depending on the
current air quality index. The LED display shows between A1, A2, A3, A4 or A5.
• It will increase the fan speed automatically to improve air quality in the room until it returns to
healthy levels.

2.2 Manual Mode

• Press the fan speed
5 fan speeds are available. Each press will cycle between 1→2→3→4→5→1...
• When Manual Mode is selected, Auto Mode is automatically disabled.
NOTE: The air quality indicator changes according to the corresponding PM2.5 value.

2.3 Sleep Mode

• Press the Mode button
• In Sleep Mode, the fan speed will automatically be reduced to the lowest speed.

3. Child-proof Lock

• Press and hold the child lock button
At this time, other buttons are invalid.
• Press and hold the child lock button for 3 seconds again to unlock it.
4. 0-24 Hour Timer
• Press the Timer button
• When the power is on, pressing the timer button will cycle through 1 hr → 2 hrs → 3 hrs → . ...
→ 24 hrs → 0 hr etc. If the timer is set at 0 hr or restart the unit, the timer setting will be reset.
• There will be 3 seconds'delay after setting.
8
button to turn the unit into manual mode. Press to start air circulation.
to select Sleep Mode.
for three seconds, and then the child lock will glow.
to select the right time length.
keeps twinkling.
button and choose the