Publicidad
Idiomas disponibles
Idiomas disponibles
Instructions for Use
c
d
• The accessory has two holes on the
side to fit it to the window / balcony
with. The user can secure it to the
frame or wall with two screws (not
included with the accessory) to prevent
it from moving or falling out of place,
Fig. 15.
Fig. 15
Permanent installation
Permanent installation is performed using
the wall grommet. See "Description of
accessories".
• To expel hot air through the wall, it is
necessary to make an 14-cm diameter
hole in the wall and fit the wall grommet,
Fig. 16.
All manuals and user guides at all-guides.com
Fig. 14
43
24 - 38 cm.
Fig. 16
• Remove the diffusion sleeve and
connect the air expulsion tube to the
accessory.
Notes:
Do not extend the hot air expulsion
tube more than necessary (maximum
length; 140 cm).
Do not form sharp bends when
positioning the tube, otherwise the Do
not form sharp bends when positioning
the tube, otherwise the cor rect
expulsion of hot air may be impeded.
This may cause a reduction in the
cooling power and performance of the
appliance.
In order to achieve maximum cooling
efficiency and minimum noise levels,
the expulsion tube should be fitted
above the total height of the appliance,
Fig. 18.
Publicidad
