Publicidad
Idiomas disponibles
Idiomas disponibles
Instructions for Use
Fig. 25
• When the appliance or the model is
fitted with optional filters, we
recommend that these be left on
regardless of the function selected
(
, dehumidification, air
cooling
purification) in order to purify the air
more effectively.
Note:
Due to the internal configuration of the
3XM4..B, models, air is also expelled
outdoors when the appliance is set to
the ventilation function. In order to
reduce the noise produced, it is
recommended that you remove the air
expulsion tube.
Heating (only on 3XM4.1E)
When set to position
heats the air in the room until the
temperature set by the user is reached.
The air in the room is purified at the
same time.
• Plug the appliance into the mains
electricity supply.
• Put the air expulsion tube in the same
position as for dehumidification.
All manuals and user guides at all-guides.com
, the appliance
46
• This air director is not installed on the
appliance on 3XM4.1E models. The
manufacturer recommends that an air
director be previously installed in order
to distribute the air flow better. The
director is fitted as shown in the
following figures.
Fig. 26
Fig. 27
• Select the heating function, Fig. 28.
Fig. 28
• Set the thermostat to the desired
temperature. When this temperature is
reached, the appliance turns itself off
automatically. It comes back on again
when the temperature drops 2-3ºC.
Warning!
Do not cover the air intakes or outlets
on your appliance!
Publicidad
