Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning and Maintenance
Fig. 32
• Remove the basic filter from the
appliance, Fig. 31.
• Insert the purifying filter + positioner
inside the basic filter as shown on Fig.
33, remembering that it must be
housed on the lower studs first.
clack!
2
clack!
Fig. 33
• Install the assembly onto the appliance
by lining the lower studs up with the
slots on the front casing of the
appliance and pressing the top clip in
until it clicks into position. The
assembly is fitted properly when it
clicks into position.
• Close the front flap
Warning!
Fit only one set of filters onto the
support in order to ensure correct
appliance operation.
Note:
The flaps on these models are fitted
with safety stops up to which point they
can be opened without risk of the front
flap falling and causing damage and/or
injury.
The flap can also be removed in order
to clean the appliance or change the
All manuals and user guides at all-guides.com
1
48
filters more easily. When removing the
flap or in the event of the flap coming
out of position for whatever reason, the
user should fit the plastic leg on the
flap into the groove on the front of the
appliance until it is properly rehoused.
After refitting, make sure that the flap
stops when its reaches the safety stop
and does not fall.
Storage requirements
When the appliance is out of use for a
long period, set the expulsion tube to
parking position so that the appliance
takes up as little space as possible.
• To do this, bend the tube towards the
back of the appliance and secure it with
the diffusion hook, Fig. 34 and 35.
Fig. 34
Fig. 35
Prior to use at change of season
• Clean the air filter.
• Clean the casing and the grilles if
necessary.
Publicidad
