Avtech AVH304 Manual De Instrucciones página 12

2.2 Camera IP Configurations by LAN
2.2.1 AUTO Mode
Auto mode is to simplify the complicated network settings within three minutes. The connection mode of the LAN
port is "AUTO" by default. This mode is suitable when the LAN port of the device is connected to a hub.
Note: SETTING Path:
Type 1
Connect IP cameras as many as your recorder supports:
RJ45
network cable
Rear
Panel
High Definition
Display Interface
eSATA port
Monitor
Disk Array
which supports HD image display
Note: For access this recorder remotely with your mobile device or laptop, you need to connect this
recorder to Internet. For details, please get the setup manual from the supplied CD or from
www.surveillance-download.com/user/network_setup/network_setup_recorder.pdf.
All manuals and user guides at all-guides.com
ADVANCED CONFIG)  NETWORK  LAN  MODE.
(
IP camera
Laptop
Internet
iPhone
iPad
Android Devices
6
Alarm I/O to connect to ala rm devices
Alarm I/O
Or
Please refer to the IP camera旧
user manual for connection
Power Switch
DC48V IN
DC48V Adapter
CONNECTION
Remote
Controller
Please install a HDD into this
recorder before connecting it to
IP cameras for video recording.