Publicidad
Idiomas disponibles
Idiomas disponibles
Removing the appliance
1
Run emptying program. See instruction manual.
2
Turn off the tap.
3
Disconnect the mains plug.
4
Remove the water inlet and water outlet hoses.
5
Remove all screws. See installation.
6
Gently pull out appliance.
7
Pull the appliance out from the cabinet.
Technical specifications
Power connection with
transformer type 8001010566
(voltage - frequency)
Power rating
Maximum static pump pressure
Maximum water tank capacity
(without filter)
Maximum capacity of the coffee
bean container
Length of power cable
(Power socket - transformer)
Dimensions
(appliance without transformer)
H x W x D
Weight, empty
(appliance without transformer)
Type of grinding unit
18
120 V AC - 60 Hz
1600 W
19 bar
81.15 oz (2.4 l)
17.64 oz (500 g)
39" (1 m)
17.91 x 23.23 x 17.48"
(455 x 590 x 444 mm)
46 - 49 lb (21 - 22 kg)
Ceramic
AQUA-STOP pledge
In addition to the standard warranty provided by BSH,
BSH will also compensate customers for damage
caused by a specific fault in the Aqua-Stop system
giving rise to a valid warranty claim. Compensation will
be provided under the following conditions:
1
If water damage is caused by defect in materials or
workmanship in the Aqua-Stop system, BSH will
compensate customers reasonable and verifiable
damages.
2
A condition of all warranty claims is the appliance
with Aqua-Stop must have been installed and
connected correctly in accordance with all
instructions; this also includes a properly installed
Aqua-Stop extension (genuine accessories). The
warranty does not cover defective feed lines or
fittings leading to the Aqua-Stop connection at the
tap.
Publicidad
