Transform LINCOLN QFB71CE Manual Del Usuario página 5

Installation
FAUCET INSTALLATION
- Remove the gasket (3), metal washer (4), and retaining nut (5) from the faucet shank.
- If you are installing this faucet onto a 3 hole sink, replace the faucet base (2) with the base
O-ring (D) and use the decorative cover plate (C) to cover the extra faucet holes. Otherwise skip
this step .
- Feed the faucet hoses through the faucet mounting hole .
Cover
Plate (C)
3-Hole Sink Installation
- Secure the faucet to the sink with the
gasket (3), metal washer (4), and retaining
nut (5) from underneath.
- Tighten the retaining nut (5) by hand until it
is snug. Gently tighten the two screws (6) in
the retaining nut . Do not overtighten .
Please contact cs@conglomkb .com or 1-877-333-0098 for further assistance .
Base
O-ring (D)
Sink
Fig . 1
Retaining Nut (5)
5
1-Hole Sink Installation
Gasket (3)
Fig . 2
CONGLOMKB .COM
Faucet
Base (2)
Sink
Sink
Metal Washer (4)
Screws (6)