Description; Safety - Vortice HRI MINI CB Manual De Instrucciones

ENGLISH

Description

This device is a control box providing either total or partial control over a main appliance to which it is connected.
For details see "Installation", "Pre commissioning check" and "Use".

Safety

Warning:
this symbol indicates that care must
be taken to avoid injury to the user
• Do not use this appliance for functions other than those described in this booklet.
• Having removing the appliance from its packaging, ensure that it is intact and undamaged. If in doubt, contact
a Vortice Technical Support Centre. Do not leave packaging within the reach of children or disabled persons.
• Certain fundamental rules must be observed when using any electrical appliance:
- never touch the appliance with wet or damp hands;
- never touch the appliance while barefoot;
• Do not operate the appliance in the presence of flammable substances or vapours, such as alcohol,
insecticides, petrol, etc.
This appliance can be used by children no less than 8 years of age
•
and by individuals with limited physical, sensory or mental
capacities, or by inexperienced or untrained individuals, provided
that they are supervised or have been instructed in safe use of the
appliance and understand the associated risks. Children must not
play with the appliance. Cleaning and maintenance procedures that
can be undertaken by the user must not be entrusted to children,
unless under supervision.
Caution:
this symbol indicates that care must
be taken to avoid damaging the appliance
• Do not attempt to modify the appliance in any way.
• Inspect the appliance periodically to verify its integrity. If the appliance is defective in any way, do not use it;
contact a Vortice Technical Support Centre without delay.
The electrical system to which the product is connected must be in
•
compliance with applicable regulations.
• The appliance is double insulated and therefore does not require an earth connection at the socket or fixed
wiring point.
• Connect the appliance to the electrical power supply/socket only if the rated power of the supply is compatible
with the maximum rated power of the appliance. If not, contact a professional electrician without delay.
• Should the appliance be dropped or suffer a heavy blow, have it checked immediately by your Vortice Service
Centre.
• If the appliance does not function correctly or develops a fault, contact a Vortice Technical Support Centre
without delay. Ensure that only original Vortice replacement parts are used for any repairs.
• Turn off the main isolating switch: a) if the appliance does not function correctly; b) before cleaning the outside
of the appliance; c) if the appliance is not going to be used for any length of time.
• The electrical specifications of the power supply must match the data on ID plate A (fig.1).
The appliance must be installed by a professionally qualified
•
electrician.
The appliance must be wired to the power supply by way of a multi-
•
pole isolating switch with a gap of at least 3 mm between contacts.
6