Ravelli RBV 7006 Manual De Uso Y Mantenimiento página 67

Stove State
Below are given the steps for accessing the relative menu starting from Stand-By mode.
USER
MANUFACTURER
ENGINEER
Press the key "access
menu" to access
the
MENU page
In this mode you can check the proper operation of the most important parameters of the appliance. Below is a list of real data of
the stove useful for service during inspection.
- Actual flow
- Fume extractor revolutions;
- Fume temperature;
- Stove state:
To exit the STOVE STATE page and return to Stand-by page, press the button repeatedly.
Settings > Enable thermostat
Below are given the steps for accessing the relative menu starting from Stand-By mode.
USER
MANUFACTURER
ENGINEER
Press the key "access
menu" to access
the
MENU page
SETTINGS
DATE-TIME
ENABLE EXT. TH.
CONTRAST
FW VERSION
ADJUST
LANGUAGE
Press the key
"confirm" to
access the
SETTINGS
page
ENABLE THERMOSTAT
Press the key
"confirm"
to enable the function.
Use and maintenance manual RBV 7006 - RBV 7008
MENU
Press the key
"confirm"
to access the
USER page
ALARM ACTIVE
MENU
Press the key
"confirm"
to access the
USER page
Press the
key "selection"
to switch to the
function
ENABLE THERMOSTAT.
By repeadely press-
ing the key ou will go
back to the
"STAND BY"
USER
SCREW FEEDING
CHRONOTHERMOSTAT
AIR-PELLET SET
STOVE STATE
Press the key "selection"
to quickly switch to STOVE
- Actual flow set;
- Inlet flow meter temperature;
- Heated flow meter temp.;
- Electronic board temperature;
USER
SCREW FEEDING
CHRONOTHERMOSTAT
AIR-PELLET SET
STOVE STATE
Press the key "selec-
tion" to quickly switch to
the second page of the
menu SETTINGS.
SETTINGS
DATE-TIME
ENABLE EXT. TH.
CONTRAST
FW VERSION
ADJUST
LANGUAGE
Press the key
to access the function
In Stand-By mode, instead of the measured and settable
ambient temperature appears the line T ON if the room
where the thermostat is installed has not yet reached
the requested value or the writing T OFF if the room
temperature set has been reached.
Rev.0 09-07-19
Page 67
USER
SCREW FEEDING
CHRONOTHERMOSTAT
AIR-PELLET SET
STOVE STATE
STATE.
USER
COMFORT CLIMA
SETTINGS
ENABLE THERMOSTAT
"confirm"
EN