Auerswald COMpact 5200 Manual De Instrucciones página 58

Installation
• Enabled terminators in the PBX at the internal U
operating mode "U internal"
P0
If the terminals and the PBX have a short distance
to each other, connect a single COMfortel 1200/
1400/1600/2600 system telephone directly to the
RJ-45 socket of the internal U
ISDN terminals or two system telephones per port
you require a U /S
P0 0
If the distance between PBX and terminal is greater,
lay the lines fixed at the terminal clamps of the inter-
nal U port.
P0
Caution: Terminals integrated in the wall sockets are destroyed and can damage the
device.
• Contrary to the S
already integrated in the terminals (COMfortel 1200/1400/1600/2600 or U
• Remove terminals which have already been integrated in the wall sockets for use at the
U port.
P0
Note: You do not need an ISDN wall socket if you use a U
Adapter can be mounted on the wall or it can be connected to the PBX via the two screw
terminals on the back.
58
port. For all other
P0
Adapter.
port, do not equip a line at the U
0
port in question
P0
terminators enabled
internal U
port with terminals. These are
P0
COMpact 5200/5200R/5500R - Instructions V01 03/2017
port
P0
IAE/UAE8
/S Adapter).
P0 0
/S Adapter. The U
P0 0
/S
P0 0