Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
·
After installation, leave the freezer for 24 hours before turning it on. This way the refrigerant can
settle.
·
Allow the appliance to run empty for 12 hours so the compartment can cool to the appropriate
temperature.
·
One can level the appliance using adjustable legs. The adjustable legs can be adjusting by screwing
them in or out of the appliance.
·
The climate class indicates the minimum and maximum ambient temperature for the proper operation
of an appliance. You can find the climate class on the type plate on the back of the appliance.
·
SN: Subnormal: ambient temperature between 10°C and 32°C
·
N: Normal: ambient temperature between 16°C and 32°C
·
ST: Subtropical: ambient temperature between 16°C and 38°C
·
T: Tropical: ambient temperature between 16°C and 43°C
DOOR CONVERSION
If you need to hinge your door on the opposite side it is recommended that you call your local authorised
service agent to make this conversion or ask a technician. Before you reverse the door, you should ensure
the appliance is unplugged and empty. After reversing the door, leave the appliance alone for 8 hours
before switching it on. This allows the coolant to set.
1.
Upper hinge cover
2.
Upper hinge
3.
Door
4.
Lower hinge
5.
Feet
·
Remove the upper hinge cover (1). Unscrew the upper hinge (2).
·
Lift the door (3) and place it on a padded surface to prevent it
from being scratched.
·
Remove the hinge pin and bottom hinge (4) by unscrewing the
screws. Remove the foot (5) from the left side.
·
Reassemble the lower hinge (4) on the left side of the appliance
by refitting the screws and reassemble the foot on the right
side.
·
Put the door (3) on the lower hinge (4) and refit the upper hinge (2). Ensure the door is aligned
horizontally and vertically so that the seals are closed on all sides.
·
Refit the upper hinge cover (1).
www.domo-elektro.be
Lift
Lower
16
1
2
3
4
5
DO91131F
37
Publicidad
