Publicidad
Idiomas disponibles
Idiomas disponibles
05 Lighting / Control Lock (3 sec)
Lighting
Control Lock
Device
authentication
06 Ice Maker Off (3 sec)
Ice Maker Off
07 Cubed Ice / Override (3 sec)
Cubed Ice
Override
Untitled-1 39
By default, the dispenser lamp turns on only when the dispenser is
used. If you want to keep the dispenser lamp turned on (continuous
mode), press Lighting. The lighting indicator also turns on. To restore
the default settings, press Lighting again.
To prevent accidental setting changes, press and hold Control Lock for
3 seconds. All controls will be disabled and the Lock indicator (
turn on.
When Control Lock is on, the refrigerator does not dispense ice or
water, even if the Dispenser Lever is pressed.
To deactivate, press and hold again for 3 seconds. The Lock indicator
turns off and the controls are re-enabled.
When connecting the refrigerator to Samsung Smart Home App or
Samsung smart devices such as Samsung Smart TVs, follow the app's
or device's onscreen instructions and press and hold Control Lock for
5 seconds. The temperature panel displays "on" for 5 seconds before
proceeding with the authentication procedure. Note that the Control
Lock function will be not affected by this authentication.
To disable ice making, press and hold Ice Maker Off for 3 seconds.
In this mode, ice making is disabled even if you press Cubed Ice or
Crushed Ice. To turn ice making back on, press and hold Ice Maker Off
again for 3 seconds.
You can select an ice type.
Press Cubed Ice to dispense cubed ice. The corresponding indicator
turns on.
The Override function activates/deactivates Smart Grid (See page 46).
Press Cubed Ice/Override for 3 seconds to set/clear the Override
function.
) will
English 39
2016-03-30
1:11:15
Publicidad
