Descargar Imprimir esta página

Pulsar PTG1221A2 Manual Del Usuario página 25

Publicidad

Idiomas disponibles

Idiomas disponibles

Before performing any maintenance or cleaning work, switch off the engine and wait until
WARNING!
the blade has come to a stop.
Improper repairs can result in the product functioning unsafely. This may endanger
CAUTION!
yourself and other.
Problems which cannot be fixed with the aid of following table may be fixed by a qualified service center. Please call
1-866-591-8921 for the nearest service center in your area.
Please be aware that any improper repairs will also invalidate the warranty and additional costs may be incurred.
Use only genuine spare parts. Only these spare parts are designed and suitable for the product. The use of other spare
parts not only voids the warranty, you can also endanger yourself and others.
FAULT/MALFUNCTION
Loud while running,
machine vibrates heavily
Engine does not start
Engine runs unsteadily
Uneven mowing results
Grass bag is not filled
TROUBLESHOOTING
CAUSE
Screws are loose
Blade fasteners are loose
Blade is unbalanced
Start/stop lever not pressed
Spark plug is defective
Fuel tank is empty
Engine may be flooded
Air filter is soiled
Spark plug is soiled
Blade is blunt
Cutting height is too low
Blade is worn
Grass bag is clogged
Cutting height is right?
The lawn / grass is wet ?
Does the discharge channel/
housing blocked ?
Does underside
of the mower deck have
been clogged?
24
SOLUTION
Check screws
Check blade fasteners
Replace blade
Replace spark plug
Call customer service center
Refill with fuel
Remove plug and dry
Clean the air filter
Clean the spark plug
Sharpen the blade
Set correct height
Replace the blade
Empty the grass bag
Correct the cutting height
Allow the lawn to dry
Clean the discharge channel/
housing
Clean the underside of the mower
deck

Publicidad

loading